|
Alu Nut (2)
#302032
CNC-machined alu nut that holds front lower molded lower suspension holders. Set of two.
|
|
|
Lower 0.75mm Eccentric Suspension Holder (2+2)
#302041
Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center. Using the eccentric rear suspension holders will create more rear grip and at the same time increase steering.
|
|
|
Eccentric Nylon Hub For Bulkhead + Covers (4+2)
#302070
Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts.
|
|
|
C-hub Complete Tuning Set
#302100
Complete tuning set of all composite C-hub suspension parts is a great addition for serious racers to exactly tune the car to any track condition.
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
⢠front and rear roll center
⢠front bump steer
⢠front and rear toe-in
⢠wheelbase
|
|
|
High-Performance Drive Belt Front 3x507mm
#305431
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
|
|
High-Performance Drive Belt Rear 3x180mm
#305442
Specially modified high-performance 3mm-wide drive belt is 1mm narrower than original 4mm belt (#305441) for increased transmission efficiency. This belt is very thin and elastic as possible for an extremely effective transmission that saves batteries and eliminates friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
To fully enjoy the benefits from these high-performance belts, be sure all the transmission's ball-bearings are absolutely clean and there is no undue drag or friction.
|
|
|
Solid Alu Central Layshaft Set
#305502
Solid central layshaft set for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
|
|
Solid Alu Central Layshaft
#305515
CNC-machined strategically-lightened Solid central layshaft for use when you do not use the one-way action of the original central layshaft, and is especially useful when using the front one-way differential.
|
|
|
Low Ratio Pulley Set (ratio 1.77)
#305550
New high-performance option set of low ratio pulleys. The set includes 32T front and rear differential pulleys and Labyrinth Dust Covers (TM), 32T pulley for front one-way, and 18T central layshaft pulleys.
|
|
|
Fixed Pulley 18T (2)
#305571
Precision molded composite "low ratio" pulleys (18T) and side plate for use on solid central layshaft. Set of 2 pulleys and 1 side plate. The teeth number (18) is embossed into the side of each pulley for easy identification.
|
|
|
High-Speed Ball-Bearing 5x9x3 Blue Covered (2)
#309035
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain that is much more resilient under loads.
|
|
|
High-Speed Ball-Bearing 6x10x3 Blue Covered (2)
#309045
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain that is much more resilient under loads.
|
|
|
High-Speed Ball-Bearing 10x15x4 Blue Covered (2)
#309054
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.
|
|
|
Ball-Bearing 10x15x4 Rubber Sealed - Oil (12)
#309055
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain. These highest quality ball-bearings are fitted with special polyamid blue covers, and are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.
|
|
|
Universal Set Of Plastic Shims
#309319
Set of shims for setting static wheelbase. Fits over rear lower pivot pins, servo saver, front one-way diff and other shims.
|
|
|
Pin 2x10 (10)
#981210
Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
303120 |
|
Jul. 28, 2005 |
303121 |
|
Jul. 28, 2005 |
302041 |
|
May 09, 2005 |
303160 |
|
Mar. 16, 2005 |
901308 |
|
Jul. 30, 2004 |
901408 |
|
Jul. 30, 2004 |
902308 |
|
Jul. 30, 2004 |
902310 |
|
Jul. 30, 2004 |
902312 |
|
Jul. 30, 2004 |
904306 |
|
Jul. 30, 2004 |
940509 |
|
Jul. 30, 2004 |
940610 |
|
Jul. 30, 2004 |
941015 |
|
Jul. 30, 2004 |
965050 |
|
Jul. 30, 2004 |
981210 |
|
Jul. 30, 2004 |
305571 |
|
Apr. 30, 2004 |
303159 |
|
Feb. 12, 2004 |
302100 |
|
Jun. 18, 2003 |
305550 |
|
Jun. 16, 2003 |
303153 |
|
May 15, 2003 |
| |
|
|